Turbine Oil Filtration Machine

Service Details:

Turbine/ Hydraulic/ Lube Oil Filtration Systems

On the basis of customer requirements, we supply a wide variety of National aerospace standard & ISO Standard grade lube Oil Filtration Machine in the market. These products from our side are extremely high speed in its design and has a robust body. It has been produced by our experts using innovative anti-friction linear technology. It has been polished well and can easily withstand effects of high pressure and temperature.

Features

• Removal of impurities below 1 micron
• National aerospace standard of filteration without effecting the additive properties of oil
• Removal of moisture to the desired ppm level
• High speed filteration units to achieve desired results in alloted time schedules
• Higher grade filteration than normal centifugal or local filteration units
• removal of varnish, which is a thin insoluble film deposit that is usually found on bearings and servo-valves
• Machine flow rate avalibiltyfrom 10 ltr/min upto 300 ltr/min as per company requirment
• Other Details:

• A centrifuge cannot remove emulsified water from turbine oils, which acts as a catalyst to increase oxidation, causes foaming in oils and reduces component life
• One of the major problems of continuous water presence in the oil is formation of varnish, which is a thin insoluble film deposit that is usually found on bearings and servo-valves
• It is a high molecular weight substance that is insoluble in oil. Varnish insoluble are more than 75 percent soft contaminants that are less than 1 micron in size and are not measured by traditional particle counts. Insoluble compounds have polar affinities and begin to migrate from the body of the base oil to machine surfaces
• Initially, the surfaces start to show a golden or dark brown color, which then changes to darker gum layers that hardens into lacquer. Varnish cannot be removed by a centrifuge. It can choke turbine oil filters, servo pencil filters, reduce bearing life, cause servo directional valves to stick & fail and can even cause turbine shut-down
• Varnish’s propensity to attract dirt and solid particle contaminants increases component wear. Varnish’s insulation effect causes loss of heat transfer in heat exchangers

Additional feathures
Oil separation services offers trolley mounted portable Oil Cleaning Machine which can clean almost all industrial oils to Super-clean levels NAS 4 even from dirtiness levels of NAS 99. Another prime advantage with these machines is that low vacuum dehydration attachment is inbuilt for fast removal of moisture/water from the oil. These machines are versatile in usage and can be used to clean oil in tanks (online) or in offline barrels and stand-by tanks. The benefit of such systems is that a single machine can be used to clean a number of oil tanks in a plant. However, the performance of the machine will depend largely on usage by factory personnel who will have to schedule it to different oil tank locations sincerely and religiously.

Oils which can be cleaned:

• Hydraulic Oil
• Turbine Oil
• Gear Oil
• Lubrication Oil
• Engine Oil
• Compressor Oil
• Thermic Fluids
• Transformer Oils
• Honing Oil
• Quenching Oil
• Edible Oil
• Flushing Fluids
• Testing Oils
• Water Glycols
• Fire Resistant Fluids
• Rust Preventive Oils
• EDM Oil
• Solvents etc

 

Request
Callback

Additional Information:

• Production Capacity: 10 units per week
• Delivery Time: 1 week
• Packaging Details: wood and mild steel casing